construction worker training requirements For rule-specified training, see the L&I training kits. Employers are responsible for providing worker instruction and training under section 21 of the Workers Compensation Act. These Guidelines and Procedures MUST be implemented at all times on all construction sites. Workplace-Specific Training Many employers will need to provide workplace-specific training. To help raise awareness of the training required to work in Ontario construction, we have put together a Training Requirements Chart (W001). The statute calls this curriculum Site Safety Training (SST). The course is provides a general awareness of lead, the risks, preventive measures, and OSHA requirements in 1926. Ability to work in all weather. A third (33%) of employers that provided training for staff stated that at least one member of staff had worked towards a nationally recognised qualification, including 18% who had staff working towards an NVQ/SVQ. These training materials provide basic awareness education on the subjects they cover. HTML PDF: 296-155-699: Appendix A to Part O—References to Part O of chapter 296-155 WAC. To be able to carry out construction work, a person must complete an introductory safety training course called ‘general construction induction training’. They can improve their skills by taking classes in welding, woodshop and mathematics while still in high school. Other OSHA standards make it the employer's responsibility to limit certain job assignments to employees who are "certified," "competent," or "qualified" - meaning that they have had special previous training, in What Training Is Needed to Become a Construction Worker?. A journey-level worker has sufficient knowledge and skill of their trade received through formal apprenticeship training or practical work experience. Construction Workers Must Take OSHA’s 10-hour Construction Course. 9 days off-the job training and an average of 6. While basic documentation of all training activities is a good idea, construction tasks with specified documentation requirements include: Employee medical records; Asbestos Awareness, Abatement, Operations, and Maintenance; Bloodborne pathogens; Cadmium; Control of Hazardous Energy (LOTO) Six weeks paid training on construction sites; Instruction in construction concepts, green building; practices, tool use, blueprints, math and measuring; Insulation, drywall, siding, roofing and deconstruction; OSHA 10 Completion Card; Lead Abatement Worker Certification; Earn 36 continuing education units; Union and construction industry speakers/tours Many leaders in the construction industry realize the value of an in-house training program in their businesses. There is no further education needed, as employers train these professionals on the job. Performance Management Training: While hands-on training and experience can take the place of formal education, many of these positions require a bachelor's degree in construction management, construction science or a related Education and Training One plus side of becoming a Construction Worker is that one does not have to amass thousands of dollars of student loan debt earning a Bachelor's degree in order to get an entry-level position. com Training supervisors on the Fair Labor Standards Act (FLSA) can help employers comply with the various provisions of the law. From La DOTD Work Zone Training Requirements: “Approved courses are offered by ATSSA and AGC. The study, “Renovation in hospitals: Training construction crews to work in health care facilities,” recently published by the American Journal of Infection Control, surveyed a total of 129 respondents working in various roles at the top 15 U. You can train with confidence knowing that each of our programs is backed by nearly 25 years of employee training and development experience, as well as a combined total of 385 years of subject matter expertise. The table below allows employers and employees to access A journey-level worker is a highly experienced individual who is recognized by a state or federal registration agency, and/or an industry, to be fully qualified to perform the skills of their trade. Requirements for lift-slab construction operations. This page contains health and safety resources for workers who may be at risk of exposure to COVID-19. Appendix A, Scaffold specifications. gov As a construction worker, you will be subject to building codes, environmental regulations, safety codes, and labor agreements. As a requirement of Local Law 196 of 2017, workers at job sites requiring a Construction Superintendent, Site Safety Coordinator or Site Safety Manager must have a total of 40 hours of safety training. 0. Specific requirements are spelled Construction Programs at STC: A nine-credit certified construction worker certificate is available here, as well as two-semester plans for construction managers and construction management apprentices. Other Training Requirements Your workplace may have additional training requirements depending on the nature of work. OSHA Construction Industry Training Requirements. The training required by these plans must be provided to miners before they begin work at a mine, or before they receive new work tasks or assignments. Training for workers, training for nominated supervisors (for licensed asbestos removal work), and training and requirements for licensed asbestos assessors and competent persons for clearance inspections. You must know the differences between these standards, the defined roles for confined space workers, and requirements for confined space training. Construction site safety is everyone’s responsibility. Although, the development of technology is rapid in most of the sectors, construction work is still labour intensive. degrees in both trades. This includes OSHA standards and requirements, and safety awareness to help find and reduce job-site hazards and risks. com Construction Worker education and training requirements There is no particular formal education for construction workers, although those who help in electricity, plumbing and steam fitting, for instance, should have a high school diploma. 5 billion annually in training every year. Construction workers can work in Queensland using general construction induction training cards issued by other states and territories. Price: $20. 21(b)(2) as these relate to the hazards of work on scaffolds. Hispanics now comprise more than 20 percent of construction employees. execute the Work and who shall be responsible for the proper completion of the Project. To be effective, training must be understandable [29 CFR 1910. · Before you are first assigned a task, (Add name or title of person who will conduct on-the-job training for new employees) will show you what to do along with safety instructions and required PPE. Referenced in Subchapter 4 and 7, Cal/OSHA T8 Regulations (August 2006) The following is a list of the instruction and training requirements contained in the Construction Safety Orders (Subchapter 4) and the General Industry Safety Orders (Subchapter 7) of Title 8, Division 1, Chapter 4 (with several references contained Thus, refresher training is crucial to brush up workers’ safety and health knowledge and help them stay safe. Contractors work on construction sites to implement the Drywall continues to be the most common interior wall covering in buildings, so the demand for these workers is expected to continue to come from the construction of new buildings. health care contractor firms. Worth airport offers hope in the effort to stem a surge in fatalities among Hispanic construction workers. If a worker or supervisor has already completed a program that is comparable to the awareness training requirements, will he or she have to “re-take” the training? Workers and supervisors who have completed an awareness training program that covers the minimum content requirements set out in the regulation before the regulation came into Construction employers must comply with Cal/OSHA regulations found in the following subchapters of California Code of Regulations, title 8, chapter 4: subchapter 4 (Construction Safety Orders); subchapter 5 (Electrical Safety Orders); and subchapter 7 (General Industry Safety Orders). Watch our OSHA 30 construction video below. The focus of the training is on lead safety in construction. have a right to a safe workplace. It helps employers fulfil their duty to protect the health and safety of their workers. · We have established safety rules and personal protective equipment (PPE) requirements based upon a hazard assessment for each task. See full list on safetyskills. Also, keep track of any training session on any topic with our FREE recordkeeping tool. The Texas Department of Insurance, Division of Workers' Compensation (DWC) offers low-cost OSHA 30-Hour Construction courses. Be at least 18 years of age. 675 RSMo, requires all contractors and subcontractors who enter into contracts with public bodies for construction of public works to train their on-site employees regarding the potential hazards they may encounter. Requirements. S. 5 days on-the-job training in the last year. Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train (or instruct, or communicate, or inform . Many OSHA training classes provide basic or introductory information for workers. any other education or training required to complete the task or job safely. Even though some jurisdictions, employers, and unions require 10- and 30-hour construction Outreach training to work on construction sites and to fulfill their safety training goals, OSHA still considers the program voluntary. Site requirements for the welfare of construction workers on site; Hazards and controls associated with construction sites and activities including working at height and confined spaces; Site environmental management including management of waste and ecology; What employers will get. This is also commonly known as ‘white card’ training. Workers are hired by three types of employers: consultants, contractors, and subcontractors. Topics include general requirements for formwork and masonry construction. Apprenticeships Requirements to qualify for the program First, the open position (s) must be of a one-time or seasonal nature. 30 (d)]. The BLS comes in handy again here as they report that a yearly annual salary of $93,900 is possibly on the horizon for those that enter into a construction manager position. To make it easier for you, we’ve gone through 270 pages of the OSHA 2254 - Training Requirements in OSHA Standards , the official training guidance document from OSHA, and put together a quick guide for OSHA required annual training. A construction worker has many educational career paths open to him. High school students searching for foundational trade skills and experience should consider vocational programs at their school. . Requirements Related to Hiring and Recall Decisions . work with public health authorities to halt the spread of the virus. OSHA includes all work for construction, alteration, repair, painting, and decorating in its construction category. For some employers, this may mean conducting training in multiple languages or employing different training methods. nyc. Construction projects should be safe workplaces. Similar work experience may be beneficial. . This term is used by MIOSHA and the Bureau of Labor Statistics for tracking and reporting of these types of injuries. The Control of Lead at Work Regulations - lead is another hazardous material found on construction sites that has its own legal requirements. A. It does not meet training requirements in any OSHA standard. See full list on www1. All people using equipment at work must be adequately trained to ensure health and safety in its use, supervision or management. Many OSHA training requirements dictate that the trainees must have an opportunity for interactive questions and answers with the training instructor, so there are no shortcuts available, and you cannot simply have another worker pass the information along second-hand. A construction worker typically has to work long and tiring hours, so they must have stamina Construction Manager: This is a totally viable option for construction workers that would like to make some extra cheddar without the need to pick up a hammer or drill. None of the jobs listed here require a four-year college degree. Requirements for carrying out construction work. HTML PDF: 296-155-697: Requirements for masonry construction. It outlines TRAINING Construction Health and Safety in Ontario For info on training courses or to learn more, call us! Construction Safety Association of Ontario 1-800-781-2726 info@csao. An apprenticeship training program consists of on-the-job and in-school training. Employees in construction are more prone to injuries than other types of workers. When making hiring and recall decisions, mine operators may consider Workers under the city's new safety regulations were already supposed to have taken at least 10 hours of safety training by March 1, 2018, or be able to prove that they have completed equivalent Many employers already offer training and awareness programs that meet or exceed the MOL mandatory training requirements. Ready to learn from on-the-job training when necessary. Construction work is defined as work for construction, alteration and/or repair, including painting and decorating. The modern construction worker has to be willing to learn the new software, apps, and devices that make construction easier. He can learn the trade on the job, attend vocational school or obtain OSHA Training Requirements - Lead - Construction. The training program must also ensure employees receive information about a number of specific asbestos-related topics. Specific training course requirements are: Flagger: Successful completion every four years of a work zone flagger course approved by the Department. Construction laborers and helpers work on almost all construction sites, performing a wide range of tasks varying in complexity from very easy to extremely difficult and hazardous. Required Safety Training – OSHA 10 The Construction Safety Training Act, Section 292. The guidance is not intended to revoke or repeal any worker rights, either statutory, regulatory or collectively bargained, and is not Construction Safety Training Construction is one of the nation’s largest industries. Department of Labor. Gov. Either way, employers need to keep records to confirm worker participation in mandatory training or its Under the Occupational Safety and Health Act of 1970 (OSHA), workers in the U. OSHA has developed a "summary" of Training Requirements in OSHA Standards, but at 270 pages, ensuring training requirements are fully met can be a daunting task. Annual Refresher Training programs of Part 48 to satisfy the training requirements for both regulations. All construction, including those activities for which social distancing may not be maintained and the start of new construction projects, is authorized to resume. Watch a Video: How to Become a Construction Worker. Construction workers that are comfortable with the technology and who take the time to learn how it works and how to take advantage of all the features will be more valuable. 9 days off-the job training and an average of 6. HTML PDF: 296-155-695: Miscellaneous concrete construction. csao. DART: Days Away from Work, Restriction of duty, or Transfer. Construction scaffold planks must not extend more than 18 inches or less than six inches beyond the supports. As a construction worker, how can I protect myself and slow the spread? Potential sources of exposure include having close contact with a coworker or member of the public who is ill with COVID-19 and touching your nose, mouth, or eyes after touching surfaces contaminated with the virus or handling items that others infected with COVID-19 have touched. Skill and experience is gained by doing jobs under the guidance of seasoned workers. Since the competent person is required to make important decisions, their training must go beyond the introductory level, to a level which provides enough information to be useful in their decision making process. The Occupational Health and Safety (OHS) Regulation also requires mandatory worker education, training, and/or certification in many cases. Employers that funded or arranged training estimated that each member of staff trained had received an average of 4. Construction Laborer Requirements: Must have a valid driver's license. 62, Lead. The Texas Department of Insurance, Division of Workers' Compensation (DWC) offers low-cost OSHA 30-Hour Construction courses. The construction industry has registered enormous growth worldwide in recent years. All construction sites MUST conduct a Safety Stand Down day to disseminate these Guidelines to all employees and workers. Workers often start as unskilled laborers to learn the basics of the job before going on to refine a specific skill. Phase 2 Construction COVID-19 Job Site Requirements Phase 2: All construction, including new work, is now allowed. Independent contractors who choose to follow this policy must have their own Part 48 training plan approved by MSHA. Ability to do physical labor and other strenuous physical tasks. 5 days on-the-job training in See full list on safetyskills. OSHA refers to this as requirement The NPDES/SDS Construction Stormwater CSW General Permit requires training for personnel implementing permit requirements on construction sites. For many years, workers in the construction industry have taken OSHA compliance training in the classroom. 454, Training requirements. New Construction Employee Safety Orientation Guidelines This document is intended to be used by construction employers as MINIMUM guidelines to conduct a site safety and health orientation for all new employees, including temporary workers and subcontractor employees. What skills, knowledge, training and experience do construction workers need to carry out their work in a way that ensures health and safety on site? Workers must have the skills, knowledge, training and experience (SKTE) to do the work that they have been employed to do, or be in the process of obtaining them. However, with the increasing demand for safety courses, OSHA Outreach Training is also offered online to accommodate a growing need, busy schedules or those who don't have access to a training center. Sometimes referred to as “unskilled laborers,” construction workers are far from that. For example, workers in the construction industry may need to be trained on Working at Heights Construction. The content must be developed by the employer conducting That’s why we, and the other NABTU affiliates, invest over $1. org The Occupational Health and Safety Act(OHS Act) requires constructors and employers to provide worker training. Construction workers typically learn their trade through on-the-job training with no formal education required. Potential hazards: Tour the work areas and facility and discuss associated work area hazards and safe work practices. SST requirements apply to any job sites that have a designated Construction Superintendent, Site Safety Coordinator, or Site Safety Manager. These incidents account for 10% of roadway congestion and 24% of roadway delays — and hundreds of worker and pedestrian fatalities each year. Local Law 196 of 2017 changes the safety training requirements for any construction or demolition projects that require an SSP. "The Hispanic proportion of the construction industry work force has grown Now work out what training, instruction, information or supervision will be needed for workers to gain the skills, knowledge or experience to work safely. Workers, supervisors and employers are all responsible for safety. When working at heights, industry standards require construction workers to complete a Work Safely at Heights short course provided by a Registered Training Organisation. The following prompts will help you to decide how to best deliver adequate and suitable training, instruction, information or supervision to workers. construction Training Documentation Requirements. Workers and other people at the workplace, including visitors should be given workplace specific induction training before work starts or The NIEHS Worker Training Program (WTP) has been tracking information about the coronavirus disease 2019 (COVID-19) as it pertains to protecting workers involved in emergency response and cleanup activities performed in the United States. EPA AHERA Requirements (PDF) (96 pp, 589 K, about PDF) Construction Worker Job Requirements: No formal qualification is required, although a high school diploma may be preferred. A safety training program at the Dallas/Ft. Jobs in construction range from lower-paying unskilled jobs to highly paid jobs that require formal training through an apprenticeship program, technical school, or community college classes. Provides non-mandatory guidelines to assist employers in complying with the requirements of subpart L of this part. This mobile compatible course is designed for construction workers who want to learn about safely working with concrete and masonry. Document: University of Michigan Construction Safety Requirements. S. Most employers require construction workers to have a high school diploma. Part 46 defines construction workers who are exposed to hazards of mining operations as miners. S. For most construction labor jobs, a high school diploma is the minimum education requirement. S. For this reason, training can sometimes be a confusing topic, especially in the Construction industry — which comprises over 20% of all worker fatalities each year . Construction laborers , also referred to as construction craft laborers , perform a wide variety of construction-related activities during all phases of construction. "What we're talking about is a short-term, temporary need," Campanaro said. This includes OSHA standards and requirements, and safety awareness to help find and reduce job-site hazards and risks. Construction Checklist - Safety (F418-055-000) Construction Ergonomics; Construction eTool; Danger, Construction Area Authorized Personnel Only (FSP1-013-000) (poster) Driving Safety; Fall Hazards: Standing Walls (F417-252-000) Fall Protection Work Plan (F417-272-000) Spanish (F417-272-999) Part 1926 - Safety and Health Regulations for Construction Part 1927 - Reserved Part 1928 - Occup. This training program is voluntary. Part 1926 - Safety and Health Regulations for Construction Part 1927 - Reserved Part 1928 - Occup. Globally-recognised and respected certificated training for Training Requirements in OSHA Standards . For every 4 billion vehicle-miles f travel in the United States, there is a work zone fatality. That’s why this is one of the essential Construction Requirments Required Training For Workers And Supervisors. At Hazmat School, our online asbestos awareness program meets the training requirements specified for workers performing Class IV work, which involves cleaning up asbestos-containing waste and debris. Some modules may be used for employee training, but do not meet training requirements specified in L&I rules. Licensure to work with hazardous materials may be required. Participation in our training will outfit your employees with a more thorough and up-to-date understanding of the magnitude of silica in the construction environment, basic hazards, evaluation and control techniques and OSHA’s new requirements surrounding the new Respirable Crystalline Silica in construction regulation. An equivalency checklist is being prepared by the ministry to help employers determine if their programs qualify. The construction workers are one of the most susceptible of the unorganized and unskilled labour as they are being exposed to serious OHSE hazards. Home-remodeling projects are also expected to be a source of job growth as owners of existing homes and other buildings make improvements. To determine whether your job site requires the safety training, please visit the Site Safety Construction Map and enter your job site address. Any existing construction projects complying with the points below may resume only those work activities that do not require workers to be closer than six-feet together. Perform site clean-up. Employees who are exposed to hazardous waste on the job must take part in an initial safety training and then receive an eight-hour refresher course annually. Internal personnel, outside personnel (such as vendors) or a combination of the two may be used to meet the training requirements. Some construction workers may need additional training for specialized work, and anyone with supervisory responsibilities should take OSHA 30-Hour Construction Safety Outreach Training. All construction employees (10-hour) and supervisors (30-hour) are required to take OSHA-authorized training within 15 days of being hired. If the planks extend more than 18 inches, you run the risk of walking on unsupported ends. At this point, most construction workers in NYC are aware of the OSHA 10 Hour Construction card requirement: you must have taken an OSHA 10 Hour Construction course within the past five years to be able to work on most construction jobs within the five boroughs of New York Union construction workers rise to meet the many challenges of COVID-19 Extensive safety training and guidance gives certain union construction workers a competitive advantage. Consultants are the planners and designers of construction projects who translate the project into a workable plan. org www. OSHA recommends Outreach Training as an orientation to occupational safety and health for workers. A PCBU must provide the information, training and instruction necessary to protect all people from risks to their health and safety arising from the work being carried out. To stay on the job, all affected construction and demolition workers must complete 40 hours of Site Safety Training (SST) and earn an SST Worker card by March 1, 2021. The eight-day courses are presented by OSHA-authorized instructors who train employers and employees in the basics of construction safety. At a minimum, the training should cover overtime requirements, the prohibition against off-the-clock work, and ensuring all hours of work are recorded and compensated. The Occupational Safety and Health Administration (OSHA) has published a general industry standard, and a construction industry standard for engaging in confined space work. High school diploma. There are no educational requirements for general construction laborers. ) employees in the safety and health aspects of their jobs. . E. OSHA 2254-09R 2015 See full list on careertrend. 1926. D. Each of our construction CPR training courses covers Automated External Defibrillator (AED) use, basic first aid and much more. Jay Inslee’s Construction Working Group Recommendations 4/23/2020 Phase 1 Construction Restart COVID-19 Job Site Requirements Phase 1: Low-risk construction work resumes. Tips for Central, PA Road Construction Workers to Minimize Hazards. Most entry level Construction Worker jobs only require a High School diploma or G. Training gives workers the knowledge to recognize the hazards they face and do their jobs safely. Year after year, we see the return on that investment as thousands of apprentices across the skilled trades complete their training and go on to become the safest, most highly trained construction workers in the world. Numerous degrees are also available for aspiring electricians and welders, including A. This might include moving and setting forms for the shape of poured concrete or taking apart equipment. All those who work in the construction industry must undergo safety induction training and be issued with a Construction Induction Card (CIC). There are usually no specific educational requirements for entry-level construction workers. Cal/OSHA; Cal/OSHA Safety & Health Training and Instruction Requirements. You must know the differences between these standards, the defined roles for confined space workers, and requirements for confined space training. Knowledge of mixing and pouring construction material (concrete, sand, grout etc. Plank ends must be overlapped at least twelve inches or nailed, so the planks will not move when you walk on them. Required OSHA Training (10 hour & 30 hour) State Map OSHA 10hr or 30hr training is required by some States and companies in order to be qualified to work on construction sites or perform certain duties. Local Law 196 Training Requirements for NYC Construction Under Local Law 196, New York City now requires all workers within specified jobsites to meet new OSHA training requirements. See Section 21 of the permit. Education, training & certification. com Helpers assist construction craft workers, like carpenters or electricians. Proven experience as construction worker; Experience in operating equipment like trench rammers, drills, pneumatic hammers etc. Substitutes for these courses must be approved by the LA DOTD Work Zone Task Force. involves diving work. Construction jobs encompass a variety of roles related to different disciplines. The new training requirements of Local Law 196 apply to construction and demolition workers at most worksites in New York City. Credit Hours: 1. An introduction to OSHA and its Construction Standards, 29 CFR 1926, covering several subparts of the Assist craft workers. There are more than 702,000 construction companies in the United States. Our CPR training for construction companies lasts approximately 5 hours and 30 minutes and can be given at our offices or your facility. Several groups, including unions and contractor associations, sponsor apprenticeship programs. OSHA also provides workers with the right to receive training and information to prevent workplace injuries and fatalities. Some work activities require detailed formal training but, for most everyday activities involving work equipment, adequate training can be delivered in-house using the manufacturer's instructions and the background knowledge / skills of more experienced workers and had provided training to half (54%) of their workers (directly or indirectly employed) during the last year – an increase from the figure of 39% in 2009. In its most simplistic form, training helps businesses meet compliance requirements as imposed by third parties including OSHA, government (federal, state and local) and insurance companies. OSHA gives workers the right to file confidential complaints and to have their workplace inspected. Safety and Health Standards for Agriculture Part 1949 - Office of Training and Education, OSHA Part 1952 - Approved State Plans for Enforcement of State Standards Part 1953 - Changes to State Plans According to the EPA regulations governing schools, all school staff custodial and maintenance workers who conduct any activities that may result in the disturbance of asbestos-containing building material (ACBM) must receive 16 hours of O&M training (comprised of 2 hours of Awareness Training and 14 hours of Special O&M Training). This website is not the official or final authority to determine OSHA compliance responsibilities, which are set forth in OSHA standards themselves, and the Occupational Safety and Health Act of 1970. Training, surveys and safe removal are all legal requirements. Supplements and clarifies the requirements of 29 CFR 1926. We are just one week away from the first deadline of the new NYC DOB requirement for safety training requirements. Occupational Safety and Health Administration U. Education and Training Requirements. Training and education may be needed in areas such as: housekeeping; lifting techniques; material handling; safe operation of equipment, tools, etc. West Virginia requires workers on public projects in excess of $50,000 to complete the OSHA 10-hour course, except workers employed less than 21 consecutive days are not required to complete the course. ) Knowledge of basic engineering and construction principles and methods; Able to work in a team Rhode Island requires all workers on larger state and municipal construction projects (over $100,000) to have completed an OSHA 10-hour course. — Fall Protection (training requirements) – Use an effective employee training program for hazardous substances — Construction (general safety and Health Provisions – Construction workers should wear work boots with slip-resistant and puncture-resistant soles received an average of 4. Queensland general construction induction training cards, white cards, and the former blue cards are also accepted throughout Australia. Nevada law requires construction workers to complete the OSHA 10 or 30 Hour Construction Course. Workers must be punctual The Occupational Safety and Health Administration (OSHA) has published a general industry standard, and a construction industry standard for engaging in confined space work. While entry-level workers will not be responsible for enforcing those regulations, training will go more smoothly if you know the rules. The eight-day courses are presented by OSHA-authorized instructors who train employers and employees in the basics of construction safety. PURPOSE This document provides guidance for the construction industry to support a safe, clean environment for workers. training plans under which miners are provided training. Note: Online training in your state may not be accepted for certification to perform regulated lead work. To further advance your trade skills, we encourage you to seek on-site training through part-time or summer employment. A refresher‐training course must be attended every three (3) years. Safety and Health Standards for Agriculture Part 1949 - Office of Training and Education, OSHA Part 1952 - Approved State Plans for Enforcement of State Standards Part 1953 - Changes to State Plans Our accredited construction education courses are continually reviewed and updated to reflect the latest standards and trends. This specific training for construction work. You will be required to complete the additional training if you work at a location with a Site Safety Plan. Generally, the time-frame to become competent in the trade of Construction Craft Worker is 2,880 hours (approximately one and a half years) consisting of 2,400 hours of on-the-job work experience and 480 hours of in-school training. And to better protect and organize your staff, you’ll find in-depth construction safety training – with coverage of OSHA 10, fall protection, PPE and much more. construction worker training requirements